Propane Manifold: Frequently Asked Questions

Answers to the questions we hear most from customers setting up multi-tank propane systems. Don't see your question? Email or call us. We're happy to help you pick the right setup.

Propane Manifolds & Setup

My portable generator came with a hose that has a built-in regulator. How do I connect more tanks to it?

Our GS-GANG-QCC series is built for exactly this, and it's plug and play. You keep your generator's own hose and regulator, and simply screw its handwheel onto the QCC fitting on our manifold, just like you would screw it onto a tank.

  • Pick the number of tank connections you need and choose the QCC fitting (with or without a fuel gauge) as the manifold output.
  • If your regulator ends in a hex male POL instead of a handwheel, it threads into the inner threads of the QCC fitting.
  • Not sure what you have? Send us your generator make and model and a few photos of the hose and regulator, and we'll confirm the right fit.
Can I add an automatic changeover or another regulator ahead of my generator's own regulator?

In most cases, no. A portable generator's handwheel regulator needs high tank pressure at its inlet, and a changeover regulator only puts out about 11 inches of water column, so the two don't work in series. Many portable generators also don't run well when their regulator setup is altered. The best approach is to keep the generator's own hose and regulator and connect it to one of our QCC manifolds.

If your generator has no regulator of its own (for example, a bare 3/8" male flare inlet), we can build a changeover or dual-stage setup with an outlet hose ending in a 3/8" female flare to fit it.

What's the difference between the GS-GANG and GS-DUAL packages? Can I buy a manifold without a regulator?
  • GS-GANG has no regulator. It connects your tanks to the regulator you already have, using a QCC, POL or 1/4" male NPT outlet fitting.
  • GS-DUAL comes with our dual-stage regulator already installed.

To fit a GS-GANG with a 1/4" male NPT fitting into your existing regulator, remove the POL or handwheel fitting from the regulator inlet (an 18 mm socket wrench usually does it) and thread the manifold in. Please check that this fitting actually comes off before you order, because we have seen regulators where it would not.

Should I use an automatic changeover regulator or a dual-stage regulator?

It depends on how much gas you need and how you want the tanks to behave.

  • Automatic changeover: draws from one side until it runs empty, then switches to the other side. An indicator turns red on the empty side, and the selector sets which side is used first. You can remove and refill the empty side while the system keeps running. Our standard changeover is rated about 225,000 BTU and is factory set at 11 inches of water column with no outlet adjustment.
  • Dual-stage regulator: draws from all open tanks at the same time and is rated up to 750,000 BTU, but it is not a changeover. Output is adjustable from 9 to 13 inches of water column (factory set around 11).

Add up the BTU of everything you'll run at once. If the total is close to or over the changeover's rating, go with the dual-stage, or ask us about a higher-capacity changeover. In very cold climates a changeover can freeze up and stop a generator, so it's better suited to smaller or shorter-run jobs.

Will an automatic changeover work with more than two tanks?

Yes. We build changeover manifolds for three, four and more tanks as custom orders. The tanks are split into a left side and a right side, so a four-tank changeover runs two tanks together and then switches to the other pair. With three tanks, two go on one side and one on the other.

Already have a changeover regulator? We can replace its two inlet hoses with tee or cross assemblies so you can add tanks. Just tell us the regulator's inlet fitting size and type and the hose lengths you need.

When do I need a first-stage and a second-stage regulator instead of one dual-stage regulator?

A dual-stage regulator works well when the tanks sit close to the building or appliance and the load is within its rating. We recommend a first-stage regulator at the tanks and a second-stage regulator at the building or appliance when:

  • the hose or pipe run from the tanks is long,
  • the load is high, or you're feeding several appliances,
  • the setup will run in cold weather, or
  • the appliance needs a higher inlet pressure (most propane pool heater packages we sell are first-stage plus second-stage).

The first-stage regulator carries higher pressure over the long run with little loss, and the adjustable second-stage regulator delivers the low pressure your appliances need. If you already have a second-stage regulator at the house, it can usually stay.

What information do you need to recommend the right setup?

The more we know, the faster we can get you the right equipment:

  • The total BTU of everything that could run at the same time (or a list of the appliances)
  • The distance from the tanks to the appliance or building, and whether you'll use a hose or hard pipe
  • Whether the setup is permanent or portable
  • Tank size, how many tanks, and how they'll sit (side by side or spread out)
  • The fitting type and size on your appliance or regulator
  • For generators: make, model, and whether it came with a hose that has a built-in regulator
  • Your climate, if it gets very cold

Photos of your current setup or a simple sketch help a lot.

Do I have to open every tank? Can I swap a tank while the system is running?

No, you don't have to open every tank. Each tank hose on our manifolds has its own ball valve, so you can run one, some or all of your tanks. You can leave a connection closed, use it as a backup, or close the valve on an empty tank and take it to be refilled while the others keep running.

One caution: on a manifold where the tank connections don't have their own shut-off valves, every handwheel fitting has to be installed on a tank, or gas will leak from the empty one.

How long can the hoses between the tanks and the manifold be?

The tank-side hoses (whips) carry full tank pressure, so we keep them short. Our standard whips are sized for tanks sitting side by side. For example, a two-tank manifold uses 12-inch whips. We can make longer whips as a custom order, but because they're high-pressure hoses we keep them to about 5 feet. If your tanks need to be farther apart than that, other piping is needed.

Measure from each tank connection to where the manifold will sit, and order a little extra rather than too little. You can request custom lengths in the order notes online or through a custom order from our sales team.

Can I put more distance between my generator and the tanks?

Yes. We build extension hoses with a male flare on one end to fit your generator hose's female flare, and a female flare on the other end for the generator's male flare. We can also put the QCC fitting on a hose coming off the manifold to give you more reach.

Keep the total length as short as you can. Longer hoses lose pressure, and your generator may not get the water-column pressure it needs. For long runs, a first-stage regulator at the tanks is the better answer. Also, a long new hose may hold air, so the generator might take a few tries to start the first time.

Do you make manifolds for five, six, eight or more tanks?

Yes. Our website offers up to four tank connections, and we build larger manifolds as custom orders. We've built five-tank and six-tank manifolds, and eight-tank setups made from two four-tank manifolds linked together. Larger systems often use a first-stage regulator. Tell us how the tanks will be positioned so we can size the hoses.

Can I start with two tanks and add more later?

Yes. Here are a few ways to do it:

  • Our 2+1 manifold has two tank connections plus a plugged middle tee, so you can add a third whip when you're ready.
  • We can build a manifold with a cross fitting and cap the extra port.
  • We can supply hose-and-tee assemblies that add connections to an existing manifold or regulator inlet. Tell us your regulator's inlet fitting size and the hose length you want for the added tanks.
Can one setup feed several appliances, like an outdoor kitchen?

Yes. A common layout is a dual-stage regulator at the tanks with an outlet hose or hard pipe running to a tee or manifold, with a ball valve for each appliance so you can shut one off without affecting the rest. Most grills have a 3/8" male flare connection, but please confirm each appliance's fitting.

If your appliances each have their own hose with a built-in regulator, we can use a first-stage regulator at the tanks and a QCC splitter so each appliance's regulator connects as it would to a tank. If any appliance came with an adjustable PSI regulator, don't put a dual-stage regulator at the tanks. Talk to us first.

Can you set up extra tanks or an outside connection for an RV?

Yes. A few ways we've done it:

  • Add tanks to an RV's automatic changeover (A/B) regulator with tee assemblies and hoses of the length you need, with optional ball valves so the added tanks stay off until you need them. We'll need the regulator's inlet size and type first.
  • Build a custom hose from an external tank to the RV. Tell us the length and the fitting type and size at the RV end.
  • Add a tee with a ball valve and quick connect at the regulator outlet to feed a grill or generator from the RV's tanks.

RV regulators typically deliver about 11 to 13 inches of water column. If you feed an RV from a large tank's first-stage regulator, a second-stage regulator may be needed at the RV. Photos of your tank connections help us get it right.

Can I run two generators from the same tanks?

Yes, we can build a setup with a tee and a ball valve for each generator. Make sure you have enough tank capacity: running two generators takes more vaporization than one tank can usually provide, so plan on at least two tanks open. If you plan to tie the generators together electrically (parallel cables, synchronization), check that with your generator manufacturer. That part is outside our expertise.

What should I know when installing my manifold?
  • Ball valves may ship in the ON position. Turn them OFF before you install.
  • POL fittings that go into the tank are reverse (left-hand) thread, so turn left to tighten.
  • The POL tip's machined brass cone seals metal to metal. It needs no tape, gasket or O-ring; snug it with a wrench. Fittings with an O-ring only need to be hand tight.
  • Don't use thread tape on POL or flare connections. Flare fittings seal on the flare, so tighten them with a wrench. Tape goes only on pipe threads, such as a female quick disconnect.
  • After installing, check every connection with soapy water.
  • Read the packing slip notes before installation.
Where should my tanks and regulator go? Can the equipment be used indoors?
  • Our equipment is for outdoor, open-air use. Tanks and regulators must be in an area with at least one side open so leaking gas can't build up.
  • Mount regulators horizontally or vertically with the vent facing down or sideways, never up, so rain, snow and debris stay out.
  • Rubber hose shouldn't be installed permanently inside a structure. Inside, use black iron pipe or flexible metal appliance line, with 1/2" or larger making it easier to add appliances later.
  • Run generators in fresh air because of carbon monoxide. Cooking with many burners in an enclosed trailer also needs fresh air intake and exhaust.
My generator won't start, or my appliance isn't getting enough pressure. What should I check?
  • New or long hoses can hold air, so give the generator a few start attempts to purge it.
  • Check every fitting for leaks with soapy water, and try opening one tank at a time.
  • Make sure the total load isn't more than the regulator's BTU rating.
  • Look for kinked or restricted lines. A long or small-diameter hose after the regulator can drop pressure under load, so use a larger hose or move the second-stage regulator closer.
  • Lightly tap the regulator. If the pressure jumps, the diaphragm may be sticking.
  • Check the appliance's own needle valves or gas controls.

Still stuck? Contact us. We can send replacement parts to test with.

Propane Tanks

Why do my tanks freeze up, and how many tanks should I use?

A tank freezes or loses pressure when it can't vaporize propane as fast as your equipment uses it. That depends on tank size, outside temperature, how full the tank is, and how much you're drawing. Manifolding more tanks together shares the load, so each tank works less and is less likely to frost over.

There's no single magic number, but more or bigger tanks means more vaporization. A few guidelines:

  • With 20 lb tanks, plan on at least three for a generator, and more for long or heavy use.
  • For whole-house backup, start with three tanks, or run two and keep the third ready as backup.
  • A 40 lb tank holds up better than two 20 lb tanks, and 40 lb and smaller tanks are still easy to carry for refills.
  • Tank heating blankets are another option in freezing weather.
How long will a 20 lb tank run my generator?

On a moderate load, a 20 lb tank typically runs a portable generator about 4 to 6 hours. A heavy load can make a single tank freeze up sooner, which is why we recommend a multi-tank manifold for 20 lb tanks.

Is it OK to run tanks with different fill levels together? Will gas flow back between tanks?

Yes, that's fine. With the valves open, all of the tanks feed at the same time and their pressures equalize. One won't simply empty before the others start. Pressure doesn't add up with more tanks; you get more supply, not more pressure. The tank valve design keeps liquid from flowing back out, and one tank running empty while the others still have fuel is not a problem. A nearly empty tank may frost up depending on the temperature, which is normal.

Will a 100 lb tank work if my generator is set up for small tanks?

Yes. A 100 lb tank delivers the same pressure as a 40 lb tank, so larger tanks are fine. Just choose a tank connection that fits the larger tank (see the question about tank connection types).

Do you sell, refill or recertify propane tanks? Do you sell tank level sensors?

No. We don't sell, refill or recertify propane tanks, and we don't sell tank level sensors. For refills, please contact a local propane supplier. We focus on the manifolds, regulators and hoses that connect your tanks.

I want to replace a rented bulk tank with smaller tanks I own. What do I need?

We can help with that. First, find out whether your propane supplier will leave the first-stage regulator in place:

  • If it stays, a manifold with a POL fitting can connect straight to it.
  • If it's removed, we offer a two-tank (or larger) first-stage regulator manifold.

We'll also need to know whether the outlet will be hard piped or use a hose, the total BTU of your appliances, and the distance from the tanks to the house.

Can you connect large stationary tanks (120 gallon and up)?

Large stationary tanks need copper or stainless steel lines rather than rubber hose. Stainless is the better choice if the tanks will ever be moved. Tanks this size can be daisy-chained with copper POL lines and tee blocks. Our POL fittings fit any tank whose service valve has a female POL connection.

Our specialty is portable tank setups with rubber hose, so for larger stationary installations, contact us with your layout and we'll tell you what we can supply. Some parts may be easier to source locally.

Can you build a manifold for 1 lb propane cylinders?

No. We don't make manifolds for 1 lb cylinders. They don't have built-in valves designed for manifold use, and there's a greater chance of leaks and uneven gas flow. If your appliance has a hose with a built-in regulator and handwheel, it can usually be connected to larger tanks instead.

Regulators, Hoses, Fittings & Gauges

What are the specs of your dual-stage regulator?
  • Rated up to 750,000 BTU
  • 1/4" female NPT inlet and 1/2" female NPT outlet
  • Output adjustable from 9 to 13 inches of water column, factory set around 11 inches
  • The "250" on the regulator is its maximum inlet pressure (250 PSI), not a BTU limit
  • For outdoor installation with the vent facing down. A mounting bracket is available.

The dual-stage regulator comes factory set, so adjustment usually isn't needed. On packages with a black INCREASE / DECREASE knob, that knob adjusts pressure; we set it during testing, so you don't need to change it. A regulator rated well above your appliance's needs isn't a problem.

Does the dual-stage manifold package include the regulator?

Yes. Our GS-DUAL packages include the dual-stage regulator, even if a product photo doesn't show it. If you'll use it with a generator, let us know so we can confirm it's compatible with your generator's regulator setup.

Which tank connection should I choose: handwheel, thumbwheel or hex POL?
  • Black (plastic) handwheel: for tanks 40 lb and under only, easy to install by hand, and slightly less expensive.
  • Brass thumbwheel POL: fits all tank sizes, more robust, and costs a little more.
  • Brass hex POL: fits larger tanks and is tightened with a wrench.

If you might ever use a tank larger than 40 lb, choose a POL connection. All POL fittings are reverse (left-hand) thread.

What pressure are your hoses rated for, and how long do they last?

Our 1/4" and 3/8" propane hoses are rated for 350 PSI. Tank pressure is usually about 100 to 225 PSI and rises with heat, especially in direct sun.

Sunlight (UV) is the main thing that ages a hose. Our hose manufacturer rates its hoses for about 5 to 10 years depending on the environment, and they last longest when shaded. The manufacturer recommends replacing high-pressure hoses about every 5 years. An awning or cover over your manifold goes a long way.

Rubber, stainless steel braided, or stainless steel Teflon hose: which should I choose?
  • Rubber hose works well outdoors and is a good choice when your setup is shaded from direct sun. The main risk is animals chewing on it.
  • Stainless steel braided hose adds a wrap that protects against sharp objects and chewing animals. It's available on our two-, three- and four-tank manifolds.
  • Stainless steel Teflon hose has a Teflon inner hose with stainless steel braid outside, and you can recognize it by the stainless (not brass) end fittings. It's our longest-lasting option, but it costs more and is ordered through our vendor.

If animals are a concern, we can also suggest a protective wrap or a copper-line setup.

What hose sizes do you use?
  • Tank-side whips are 1/4". That side is high pressure, and a larger hose doesn't help there.
  • Our standard outlet hose is 3/8" with 1/2" male NPT ends, and we can put 1/2" fittings on 3/8" hose. Outlet hose size matters most on long runs.
  • Our shop crimps 1/4" and 3/8" hose. Larger hose, such as 1/2", is made by our vendor and takes a little longer.
What fittings and adapters will I need to connect to my appliance, generator or house pipe?
  • Our dual-stage and second-stage regulator outlets are 1/2" female NPT. For 3/4" pipe, use an adapter such as a 1/2" x 3/4" coupler or a 3/4" FHT x 1/2" MIP adapter. We can supply these, or you can pick them up at a hardware store.
  • Our standard changeover regulator outlet is 3/8" female NPT, so you may need a bushing for 1/2" pipe.
  • Most portable generators and grills have a 3/8" male flare. Our flare adapter (1/2" NPT x 3/8" female flare) connects to it, and it's also compatible with natural gas.
  • A metal flex gas line usually ends in a female flare, so it needs a female flare to 1/2" male NPT adapter at the regulator (not an NPT-to-NPT adapter).
  • For a portable connection, the female quick disconnect goes on your house pipe and the male quick disconnect (with ball valve) goes on the hose. Our quick disconnects may not mate with another brand's, so tell us what you have.

We can't replace a QCC fitting with a quick disconnect on the tank side, because unregulated tank pressure is too high for that disconnect.

How does the fuel gauge work? Can I add one to my setup?
  • The gauge reads pressure from the tanks that are open. To read one tank, close the others.
  • It stays green until the fuel is low, then moves to yellow and red. It doesn't drop gradually like a car's fuel gauge. When you're running all your tanks, plan to refill when it shows yellow.
  • If it stays green after you shut the tanks off, that's normal. The fitting holds pressure until the tank connection is actually removed.
  • You can also watch the frost or condensation line on tanks in use.

To add a gauge to an existing setup, unscrew the regulator from its inlet, install the inline fuel gauge there, and reconnect the regulator. We also carry a 15-inch water column gauge for checking low-pressure lines. A gauge isn't required for most typical setups.

Can you build a hard-piped or copper manifold with a shut-off on every tank?

No. Ball valves can't be installed on copper lines, and we don't offer a hard-piped multi-tank manifold with individual shut-offs. Our specialty is rubber hose assemblies with a ball valve on each tank. We can supply some copper POL lines, but copper parts and long runs of pipe are often cheaper from a local supplier.

Gas is coming out of my regulator's vent. Is that normal?

No. Gas coming from the vent means the diaphragm inside the regulator is damaged, so contact us right away with the regulator's name and model number. This is also why regulators must be installed in an open area where leaking gas can't collect. Don't try to adjust a regulator below its rated output range, because that can stress the diaphragm.

Is your equipment tested, and what warranty does it carry?

Every manifold is pre-assembled and pressure tested before it ships. We use both electronic and liquid leak detectors. Our built equipment carries a 1-year warranty.

If a hose or part fails, contact us with photos (and, for hoses, the number stamped on the ferrule). We've sent replacement hoses, pre-taped and ready to install. If a regulator is defective, we send a replacement and you return the old one so our vendor can review it for warranty.

Ordering, Custom Builds & Returns

How do I place an order?

Standard manifolds, hoses and regulators can be ordered on our website. Choose the number of tank connections, hose material, tank fitting and regulator or output fitting on the product page, and add any special requests (such as a custom hose length) in the order notes.

For anything custom, email or call us. Our sales team will create a custom order for you, so please include your ship-to address.

Do you do custom builds?

Yes, custom work is a big part of what we do: longer or shorter hoses, extra tank connections, quick disconnects, gauges, elbows and special fittings. Send us a description, photos or a simple sketch. For layouts that aren't standard, we dry-fit the build and send pictures before we finalize it.

Can I change or cancel my order, or add something I forgot?

Yes. Contact us as soon as possible. We can update the order (for example, change a hose length), cancel it, or add an item. For an add-on we send an invoice for the difference. That invoice comes from a different, website-generated email address, so let us know if you don't see it.

Can I return an order?

Yes. If equipment doesn't work out for you, contact us. For an unused product in its original packaging, we email you a return label (a PDF to print and tape on the box) and refund you once we receive the package and confirm the items match the order.

Custom-cut hoses can't be returned to our vendor once they're cut and crimped, so for custom hose orders we need payment or a purchase order before we order the hose.

Can I get an itemized list of what's in my order?

Yes. We can send an itemized sheet or invoice so you know what you're getting. Most items are pre-built assemblies rather than loose parts, and we're happy to break the list down further if your receiving team needs it.

How soon will my order ship?

We build, test and ship in-stock equipment quickly once your order is placed, and we send tracking when it ships. Custom items that need parts from our vendors (such as larger hose, stainless hose or special regulators) take longer, and we'll tell you if a part is on backorder.

Billing & Payment

What payment methods do you accept?

Our website accepts major credit and debit cards, Google Pay and Apple Pay. We can also take a card payment over the phone. PayPal is not one of our listed payment options.

How do I pay for a custom order or invoice?

We email your invoice separately. Look for the faint gray "Pay for this order" link at the end of the first paragraph. It opens a secure page where you enter your payment information. If you have an account, open it under the email address the order was made with.

  • Don't see the invoice? Check your spam or junk folder. Add-on invoices come from a website-generated address.
  • If the link doesn't work or the payment page can't verify your email, contact us. We can fix the order or take your payment over the phone, and it won't hold up your build.
Can I review an itemized invoice before I pay?

Yes. Invoices generated from our website list everything, and we can edit the order if you want something changed before you pay. We'll need your shipping address to finalize shipping.

Do you charge sales tax?

We charge sales tax only on purchases made within our home state of Georgia.

Shipping & Tracking

Where do you ship from, and do you ship outside the US?

We build and ship from our shop in Georgia: 269 Thunder Ridge Drive, Acworth, GA 30101. We ship across the US and to Canada; give us your destination and we'll quote shipping. We believe most of our parts meet Canadian standards.

Our website isn't set up for overseas checkout, but we can arrange international shipping with the freight quoted separately. Shipping to a US address is usually cheaper. If you use a freight forwarder, include its reference in the shipping address.

Which carriers do you use? Can I get faster shipping?

We ship with USPS and FedEx. Faster options are available for an additional charge, and our shipping department can quote the choices for your destination and add the one you pick to your invoice. USPS Priority Mail travels by air, not ground. Once a package is handed to the carrier, delivery timing is up to them.

My tracking hasn't updated. What should I do?

With some USPS shipments, the carrier picks up the package but tracking doesn't update online right away. Give it another day or two. If your package still hasn't arrived, contact us and we'll make it right with a replacement or a refund.

My order arrived damaged. What happens now?

We're sorry! Email us photos of the damage and we'll send a replacement part, such as a new hose, or work out another solution with you.

Can I pick up my order in person?

We don't offer private pickup. All orders are shipped.

Using Our Website

Why can't I add a manifold to my cart, or why did I receive only the regulator?

On our manifold product pages, you have to select the number of tank connections, even if it looks like there's only one choice. That selection is what makes the item complete. If none is selected, the item defaults to blank and only the regulator is included. Also, changing the hose type can clear your tank connection choice, so double-check it before adding to cart.

If something still isn't working, call or email us and we'll set up the order and send you an invoice with a direct payment link.

How do I order a hose in a custom length on the website?

Go to the Shop tab and click the hose. Choose a length from the dropdown, picking the nearest length if yours isn't listed, then choose your fittings and add it to the cart. You can add a manifold the same way by choosing the number of tanks and the regulator fitting (POL, 1/4", QCC and so on). At checkout, enter the exact length or any special request in the order comments. We're also happy to help by phone.

The website isn't working for me. How else can I order?

Just contact us. Our sales team can create a custom invoice that you can pay online or over the phone.

Other Questions

Are there projects you can't help with?

We focus on portable propane tank manifolds, regulators and hoses. A few things are outside what we do:

  • Refilling, recertifying or selling propane tanks
  • Evacuating or transferring propane from 1 lb cylinders
  • Tank level sensors and metal-jacketed gas lines
  • Long runs of hard pipe or underground yellow pipe
  • The electrical side of running generators in parallel

For those, a local propane supplier, hardware store or your equipment manufacturer is the best place to start.

About Us

At propane manifold, we craft reliable multi-tank propane systems assembled right here in Acworth, GA, built to power your generators, RVs, homes, and more.
Our Mission
Trusted Quality
Contact
Get Support